Drinking water quality · 2024
· Verified
· PWSID MD0090222
What's in Beaver Run Mhp, MD tap water
Only 9 of 27 core regulated contaminants were reported for Beaver Run Mhp, MD. What was measured is not clean — but most of the picture is missing.
- !1 contaminant at or above a federal limit — worst is Arsenic at 1.1x
- !1 open monitoring or reporting violation
- !9 of 27 core regulated contaminants reported — 18 never appear in this report
+How this score is calculated
Every system starts at 100. Points come off for measured levels, for the federal violation record, and for how much of the core regulated set the utility actually reported. All three inputs are the utility's own published numbers and EPA's own records.
- −13 contaminants at or above a federal limit
- −0 contaminants within 20% of a limit
- −0 open health-based violations
- −3 open monitoring / reporting violations
- −2 health-based violations resolved in the last 5 years
- −16 core regulated contaminants never reported (9/27)
A 90–100 · B 80–89 · C 70–79 · D 60–69 · F below 60. A system reporting under a third of the core set is capped at C however clean its numbers look — a short report is not a clean bill of health.
Full grading methodology, constant for constant →What to worry about
- Arsenic1.1× the federal limit10.6 ug/L · limit 10 ug/L
A known human carcinogen; long-term exposure is linked to skin, bladder, and lung cancer.
higher than 95% of U.S. systems
+10 contaminants were measured and came in below the limitShow all
| Contaminant | Measured | Federal limit |
|---|---|---|
| Gross Alpha | 8.8 pCi/L | 15 pCi/L |
| Fluoride | 1.4 mg/L | 4 mg/L |
| Chlorine | 0.7 mg/L | 4 mg/L |
| Lead | 0.0016 mg/L | 0.015 mg/L |
| Combined Radium | 0.5 pCi/L | 5 pCi/L |
| Nitrate | 0.5 mg/L | 10 mg/L |
| Copper | 0.06 mg/L | 1.3 mg/L |
| Barium | 0.002 mg/L | 2 mg/L |
| Dibromochloromethane | 0.01242 mg/L | — |
| Gross Beta Particle Activity | 12 | — |
What this report doesn't tell you
18 of the 27 contaminants a community water system normally reports do not appear anywhere in Beaver Run Mhp, MD's data. Absent is not the same as absent-from-the-water — it means nobody published a number.
+Full detail: PFAS testing, water source, historical monitoring, and the federal violation record
Where your water comes from · EPA SDWIS
Beaver Run Mhp, MD's drinking water comes from ground water, drawn from 5 sources.
Source
- WELL 1 DO730665
- WELL 2 DO810094
- WELL 3 DO810587
- WELL 4 DO810588
- + 1 more
Treatment
- WTP - WELL 6
- WTP - WELLS 1 & 2
- WTP - WELLS 3 & 4
Distribution
Compliance history
Federal Safe Drinking Water Act violation & enforcement records (EPA SDWIS). A violation is a regulatory determination by the state or EPA — separate from the measured levels above.
- Maximum contaminant level exceededHealth-based9 violations on record · most recent Jan 2008resolved
- Treatment technique violationHealth-based1 violation on record · most recent Oct 2024resolved
- Other1 violation on record · most recent Oct 20241 open
Source: EPA SDWIS / ECHO. View the full federal record on EPA ECHO ↗