Drinking water quality

What's in Saint Paul, MN tap water

20 contaminants were measured in the Saint Paul, MN water system's most recent annual report. Each is shown below against its federal limit 2 sit at or above that limit.

Disinfectants

ContaminantMeasuredStatus
Chlorine2.56–3.11 mg/LRangeApproaching the limit

Disinfection byproducts

ContaminantMeasuredStatus
HAA516.1–43 ug/LRangeApproaching the limit
TTHM28.1–52.3 ug/LRangeApproaching the limit

Inorganic chemicals

ContaminantMeasuredStatus
Fluoride0.67–0.74 mg/LRangeWithin the limit
Nitrate0.08 mg/LReported LevelWithin the limit
Sulfate21.3Reported LevelWithin the limit

Metals

ContaminantMeasuredStatus
Copper0–0.18 mg/LRangeWithin the limit
Lead0–23.2 ug/LRangeWithin the limit
Sodium26.6Reported LevelAt or above the limit

PFAS ("forever chemicals")

ContaminantMeasuredStatus
Perfluorobutanesulfonic acid0–2.2RangeWithin the limit
Perfluoroheptanoic acid0–1.5RangeDetected — no federal limit
Perfluorohexanesulfonic acid0–1.9RangeWithin the limit
Perfluorohexanoic acid0–2.2RangeWithin the limit
Perfluorononanoic acid0–0.37RangeDetected — no federal limit
Perfluoropentanoic acid0–2.9RangeDetected — no federal limit
PFBA13.1–26RangeWithin the limit
PFOA0–2.8RangeAt or above the limit
PFOS0–1.8RangeApproaching the limit

Physical & aggregate

ContaminantMeasuredStatus
TOC44–62RangeDetected — no federal limit
Turbidity0.142 NTUMax SingleDetected — no federal limit
Every figure here is transcribed verbatim from Saint Paul, MN's annual Consumer Confidence Report, cross-checked by a second model, and approved by a person before publishing. Numbers are the utility's own — a water-quality report covers an entire service area, not a single address.