Drinking water quality · 2017

· Verified

What's in Syr4 — Mcallen Public Utility (2017), TX tap water

0 contaminants were measured in the Syr4 — Mcallen Public Utility (2017), TX water system's 2017 annual report. Each is shown below against its federal limit.

Browse the mapFull source report ↗
Reporting year
2017
Contaminants measured
0
Over federal limit
0
Approaching the limit
0
Service area
TX
state-level CCR
Source
Utility CCR
All within federal limits. Every measured contaminant in this report is below its federal threshold.

PFAS — EPA UCMR5 (2023–2025)

1 PFAS compound detected in Syr4 — Mcallen Public Utility (2017), TX

About this data

The EPA finalized the first-ever federal drinking-water limits for six PFAS compounds in April 2024. These numbers come straight from EPA's UCMR5 lab dataset — every U.S. system serving more than 3,300 people tested every PFAS sample at an entry point to its distribution system. PFAS not listed below were either tested and not detected, or not yet sampled.

PFBA

● Detected (no federal limit)
Measured 27.2 ng/LSample year 2024Samples 3 detect / 3
PWSID TX1080006 · Source: EPA UCMR5. Limits per EPA's April 2024 PFAS National Primary Drinking Water Regulation. PFAS values reported in nanograms per liter (ng/L) — note that 1 ng/L = 1 part per trillion.

Where your water comes from · EPA SDWIS

Syr4 — Mcallen Public Utility (2017), TX's drinking water comes from surface water, drawn from 3 sources.

Source

3surface water
  • INTAKE 1 - PLANT SITE / SOUTH
  • INTAKE 3 - NORTH PLANT
  • 1 - SWTP

Treatment

4treatment plants
  • SW SWTP - 2500 W EXPWY 83
  • SW PLANT - EXPANSION
  • SWTP - NORTH / 8313 N BENTSEN RD
  • + 1 more

Distribution

14storage units

Also buys water from CITY OF EDINBURG, CITY OF HIDALGO WATER SYSTEM, and 2 more.

Compliance history

Federal Safe Drinking Water Act violation & enforcement records (EPA SDWIS). A violation is a regulatory determination by the state or EPA — separate from the measured levels above.

No federal drinking-water violations on record for this system.
Source: Syr4 — Mcallen Public Utility (2017), TX's 2017 Consumer Confidence Report — the annual drinking-water report every U.S. utility is required to publish. The numbers on this page are the utility's own. A water-quality report covers an entire service area, not a single address.

People also ask about Syr4 — Mcallen Public Utility (2017), TX's water

+Is Syr4 — Mcallen Public Utility (2017), TX tap water safe to drink in 2017?

Every one of the 0 contaminants measured in Syr4 — Mcallen Public Utility (2017), TX's 2017 Consumer Confidence Report is below its federal limit. "Safe" under the EPA's drinking-water standards is health-based, not aesthetic — but by those standards, no measured contaminant in this report exceeds its enforceable threshold. Individual health concerns (e.g. immunocompromised, infant, pregnancy) may warrant additional filtering regardless of compliance.

+What contaminants are in Syr4 — Mcallen Public Utility (2017), TX tap water?

0 contaminants were measured in Syr4 — Mcallen Public Utility (2017), TX's 2017 Consumer Confidence Report. 0 have an enforceable federal limit; the rest are detected but unregulated. Every measured value, in the utility's own units, is on this page.

+Where does the data on this page come from?

Every value is transcribed from Syr4 — Mcallen Public Utility (2017), TX's 2017 Consumer Confidence Report — the annual drinking-water report every U.S. public water utility is required by federal law to publish. The original source document is archived and viewable on this site. A water-quality report covers an entire service area, not a single address.

+How often is Syr4 — Mcallen Public Utility (2017), TX's water quality data updated?

Each U.S. public water utility publishes one Consumer Confidence Report per year, covering the prior calendar year's measurements. This page reflects the 2017 report; a new report will replace it once the utility publishes its next annual update.

More water systems in TX