Drinking water quality · 2015

· Verified

What's in Highland Meadows, WA tap water

1 contaminants were measured in the Highland Meadows, WA water system's 2015 annual report. Each is shown below against its federal limit.

Browse the mapFull source report ↗
Reporting year
2015
Contaminants measured
1
Over federal limit
0
Approaching the limit
1
Service area
WA
state-level CCR
Source
Utility CCR
Approaching the limit (≥ 80%)

Compliance history

Federal Safe Drinking Water Act violation & enforcement records (EPA SDWIS). A violation is a regulatory determination by the state or EPA — separate from the measured levels above.

No federal drinking-water violations on record for this system.

Metals

ContaminantMeasuredStatus
LeadA toxic metal that leaches into water from old service lines, solder, and plumbing fixtures.0.013 mg/L90th percentileAt the tapApproaching the limit
Source: Highland Meadows, WA's 2015 Consumer Confidence Report — the annual drinking-water report every U.S. utility is required to publish. The numbers on this page are the utility's own. A water-quality report covers an entire service area, not a single address.

People also ask about Highland Meadows, WA's water

+Is Highland Meadows, WA tap water safe to drink in 2015?

Every one of the 1 contaminants measured in Highland Meadows, WA's 2015 Consumer Confidence Report is below its federal limit. "Safe" under the EPA's drinking-water standards is health-based, not aesthetic — but by those standards, no measured contaminant in this report exceeds its enforceable threshold. Individual health concerns (e.g. immunocompromised, infant, pregnancy) may warrant additional filtering regardless of compliance.

+What contaminants are in Highland Meadows, WA tap water?

1 contaminants were measured in Highland Meadows, WA's 2015 Consumer Confidence Report, spanning metals. 1 have an enforceable federal limit; the rest are detected but unregulated. Every measured value, in the utility's own units, is on this page.

+Are any contaminants in Highland Meadows, WA tap water approaching the federal limit?

One contaminant is between 80% and 100% of the federal limit in this report: Lead. Approaching means measured but not in violation — a margin that can close quickly if conditions change.

+Where does the data on this page come from?

Every value is transcribed from Highland Meadows, WA's 2015 Consumer Confidence Report — the annual drinking-water report every U.S. public water utility is required by federal law to publish. The original source document is archived and viewable on this site. A water-quality report covers an entire service area, not a single address.

+How often is Highland Meadows, WA's water quality data updated?

Each U.S. public water utility publishes one Consumer Confidence Report per year, covering the prior calendar year's measurements. This page reflects the 2015 report; a new report will replace it once the utility publishes its next annual update.

More water systems in WA